1. Disconnect a negative wire from the battery.
2. Merge impellent oil.
3. Remove a fan casing.
4. Unscrew the sensor of speed (L3) from the pallet.
5. Disconnect the conducting socket from the sensor of level of oil (18).
6. Unscrew directing pipe щупа measurements of level of oil with a flange (20).
7. Disconnect oil pipelines (14) and (15).
8. Unscrew nuts of fastening of the stabilizer (21d) from both parties.
9. Unscrew forward support of the engine (28) and lift it by means of the lift.
10. Remove springs of a forward suspension bracket.
11. Unscrew bolts (31d) a steering.
12. Lift a forward axis by means of a jack.
13. Unscrew bolts of fastening of a forward axis (22).
14. Lower a forward axis.
15. Unscrew bolts (19) fastenings of the pallet (45).
16. Remove the pallet (45) together with laying (45a).