Removal and installation of the case of the oil filter

Removal

Details of installation of the case of the oil filter

1 — the Tube of a retsirkulyatsiya of the fulfilled gases
2 — the Tube to the sensor of pressure of oil (engines 601.911)
9 — Consolidations
270 — Laying

271 — the Nut of fastening of a cover
273 — the Cover of the oil pump
275 — the Case of the oil pump
280 — the Filtering element
296 — the Sensor of pressure of oil


 PERFORMANCE ORDER

1. Remove an air purifier.
2. Unscrew a bolt (276) fastenings of a cover of the oil filter.
3. Remove filtering element (280).
4. Disconnect a tube (1) between the valve of a retsirkulyatsiya of the fulfilled gases and the inlet pipeline or a turbokompressor from the case of the oil filter.
5. Unscrew forcing tube (2).
6. Disconnect the conducting socket from the sensor of pressure of oil (296).
7. Unscrew a bolt (291) from a flange of the oil filter.
8. Remove the case of the oil filter (275) from the block of cylinders together with laying (270).
9. Wipe sealing surfaces and replace laying (270).

Installation

Installation is carried out as it should be, the return to removal. Replace consolidations (9).







QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE