Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



56822268



Introduction

Appointment

This Management was made to help on purpose to the owner of the car to receive from it the maximum return. Performance of this task is reached by several ways. The data collected and presented below allow the owner of a vehicle to be defined in what works on its service should be carried out and when, and also whether has sense to try to execute them independently, or it is necessary to address in representation office of manufacturing firm or a car-care center workshop. Descriptions of procedures of obligatory routine maintenance of the car are included in the Management and the schedule of their performance is provided. Besides, information on carrying out diagnostics of malfunctions of knots and car systems (in case of their refusal), and also ways of elimination of their reasons is offered.

Instructions for use Management

The description once the procedures mentioned in the text usually the second time does not repeat. Instead the reference to the corresponding Section/subsection of the corresponding Chapter where this procedure already met in case of need becomes. References to the provision of knot or a component at the left or on the right on the car mean finding of the reader on a driver's place the person forward. Descriptions in this management are stated in a simple and available form. If accurately to follow instructions in the text and to accompanying illustrations, there should be no difficulties. It is necessary to give due consideration to technical requirements and the moments of an inhaling of the carving connections, reduced in tables of Specifications at the beginning of each Chapter. It is necessary to be guided by specifications at performance of all works. In separate sections the necessary sizes and values for adjustment are given not always. The elementary operations, such as «to open a cowl» or «to weaken wheel nuts», are meant as self-evident and also are mentioned not always. On the contrary, in the text the most difficult procedures are in detail described.