Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
   Specifications
   Removal and transmission installation
   Forward cover of a transmission - installation details
   Removal and installation of a back cover of a transmission
   + РКПП 717.438
   + РКПП 717.454
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



56822268 soap today


Removal and transmission installation

Removal

Removal and RKPP installation

3 — the Bearing coupling switching off
4 — the Lever of switching off of coupling
6 — the Heat-shielding guard
6, 7 — Nuts
9 — a speedometer Shaft
10 — the Arm of fastening of system of release
11 — the Bracket
19 — an engine Support

27 — a connection Wire on "weight"
32 — the Clamp
33 — Shplintovoye connection of a leading shaft
60 — release System
71 — the Forward part of the driveshaft
85a — the Inductive sensor


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove an engine (19) support.
3. Remove an arm of fastening (10) systems of release (60) and a bracket (11).
4. Remove a heat-shielding guard (5).
5. Unscrew a forward part of the driveshaft (71).
6. Disconnect system of release (60).
7. Unscrew a shaft of a speedometer (9) or the inductive sensor (85a).
8. Disconnect a tube (shooter) of the hydraulic pipeline of coupling.
9. Remove a clamp (32) and disconnect drafts of gear shifting.
10. Unscrew a connection wire on "weight" (27) from a transmission.
11. Unscrew bolts of fastening of a transmission to the engine.
12. Grease shplintovy connection of a leading shaft (33).
13. Check the persistent bearing (93), the lever of switching off of coupling (4) and the ball-bearing of a cranked shaft.

Installation

Installation is carried out as it should be, the return to removal. Check oil level in a transmission and adjust it on bottom edge of a filling opening. The volume of oil makes 1.5 l.