Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
- Engine
   Compression check in engine cylinders
   Engine check by means of the vacuum gage
   Belt of a streaming drive of auxiliary units
   + 6-cylinder petrol engines (M104.944 and M104.990/994)
   - 8-cylinder petrol engines (M119.970/981 and M119.971/981)
      Covers of heads of the block of cylinders - installation details
      Removal and installation of the inlet pipeline
      Removal and installation of a final collector
      Removal and installation of heads of the block of cylinders
      Removal and installation of covers of a chain of a drive of GRM
      Replacement of a chain of a drive of GRM
      Check of phases of a gazoraspredeleniye
      GRM drive - the general information, service of components
      Removal and installation of a regulator of phases of a gazoraspredeleniye
      Removal and installation of camshafts
      Check and adjustment of control provision of camshafts
      Removal and installation of valves
      Replacement of directing plugs of valves
      Replacement of rings of saddles of valves
      Removal and installation of pistons
      Designation and sizes of pistons
      Check of a condition of rods
      Check of a condition of a cranked shaft
   + 12-cylinder petrol engines (M120.980/982)
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


56822268 Смотрите www.otsosspb.org индивидуалки петербурга.

Removal and installation of a final collector

Left final collector

Removal

 PERFORMANCE ORDER

1. Remove the bottom protective guard of the engine.
2. Remove a cross-section tube between the inlet pipeline and a final collector.
3. Remove a fan casing.
4. Unscrew a forward left support of the engine.
5. Unscrew самоконтрящиеся bolts (11).
6. Reduce pressure of fuel by means of the special valve on the distributive highway.
7. Turn on forcing (17/3) and returnable (17/2) топливопроводы.
8. Raise the engine, having substituted under the pallet a jack.
9. Remove a final collector (156) and replace laying.

Installation

Installation is made as it should be, the return to removal.

Right final collector

Removal

 PERFORMANCE ORDER

1. Remove the bottom protective guard of the engine.
2. Disconnect an exhaust pipe from a final collector.
3. Unscrew самоконтрящиеся bolts (11).
4. Unscrew a forward right support of the engine.
5. Raise the engine, having substituted under the pallet a jack.
6. Remove a final collector (156) and replace laying.

Installation

Installation is made as it should be, the return to removal.