Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
- Автоматичеcкая transmission
   Search of malfunctions - the general information
   + Automatic transmission 722.5
   + Automatic transmission 722.6
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Search of malfunctions - the general information

At failure detection of automatic transmission first of all check ATF level (see. Head Routine maintenance). If level insufficient, check a condition of the corresponding epiploons. Attentively examine all hoses concerning transmission liquid, and also a cooler and to be convinced of lack of traces of leaks. The only thing that you still can independently make, it to check and, if necessary, to replace the sensors concerning functioning of transmission. Before replacing any sensor, carry out reading of codes of malfunctions from memory of the control unit.

At rather serious breakage the control system of a box will pass to a mode of safe functioning, bringing thus the corresponding code (or codes) in memory of the control unit. It is possible to consider codes by means of the special equipment (see. Head engine Electric equipment).

In the absence of that, define the malfunction nature (electric or mechanical).

Do not try to remove a box as diagnostics is carried out only on the box established on the engine.