Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
- Coupling
   + Coupling
   Driveshaft
   + Power shafts
   + Differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Driveshaft

Removal and driveshaft installation

Removal

Details of installation of the driveshaft


2 — the Driveshaft 5, 21, 200а — Bolts 6, 20, 36 — Washers 7, 35, 88, 200 — Nuts	18 — an engine Support 19 — the Arm of a support of the engine 56 — the Epiploon 87 — the Flange

PERFORMANCE ORDER

1. Lift a transmission by means of a jack.
2. Unscrew a nut of fastening of a support of the engine (35). Unscrew bolts (21) with washers and remove an engine (19) arm together with a support (18).
3. Unscrew the driveshaft from a transmission. Unscrew a bolt (8) fastenings of a shaft of a speedometer (9) and remove it.
4. Weaken adjusting plugs in a flange кардана. For this purpose use a drift in diameter of 10 mm and length about 150 mm.
5. Weaken a nut of the driveshaft and move the driveshaft from a flange in the direction to a back part of the car.
6. Unscrew bolts (200a).

Installation

Installation is made upside-down.