|
Thickness of frictional overlays of blocks of back brake mechanisms, mm |
|
Models 140.032/033 till 12.91, 140.134 till 12.91 and 140.135 |
| New blocks |
18.5
|
| Admissible wear |
| Without a substrate |
2
|
| Taking into account a substrate (for THAT) |
13
|
| Operation of the indicator of wear |
2.5
|
|
Models 140.134 till 12.91 |
| New blocks |
28
|
| Admissible wear taking into account a substrate |
25.4
|
| Admissible wear for THAT |
26
|
|
Models 140.28/042/043/050/051/056/057 / 063/070/076/135, 140.032/033 from 01.92 and 140.134 from 01.92 |
| New blocks |
19.3
|
| Admissible wear |
| Without a substrate |
2
|
| Taking into account a substrate (for THAT) |
13
|
| Operation of the indicator of wear |
2.5
|
|
Models 140.028/032/033/134/135 and 140.042/043 / 050/051/056/057/063/070/076 |
| New blocks |
15.5
|
| Admissible wear |
| Without a substrate |
2
|
| Taking into account a substrate (for THAT) |
11
|
| Operation of the indicator of wear |
2.5
|
|
Dimensional characteristics of forward brake disks, mm |
| Minimum admissible thickness |
25.4 (with 91г. 27.4)
|
|
Models 140.134, 140.028/042/043/050/051/056 / 076/135 and 140.032/033 from 01.92 |
| Thickness of a new disk |
30
|
| Admissible wear of a disk |
27.4
|
| Admissible wear for THAT |
28
|
|
Models 140.032/033 from 01.92 |
| Thickness of a new disk |
28
|
| Admissible wear of a disk |
25.4
|
| Admissible wear for THAT |
26
|
|
Dimensional characteristics of components of the brake mechanism |
| Diameter of the new case of a support, mm |
Support of a 2-piston design (model
140.03/1 till 12.91 (ATE 57) |
56.99-57.04
|
| Support of a 4-piston design |
Models 140.02/04/05/06/07 (Girling/Lucas
in diameter 40/44) |
39.98-40.03
|
Models 140.03/1 from 01.92 (Girling/Lucas
in diameter 40/44) |
39.98-40.03
|
| Width, mm |
Support of a 2-piston design (model
140.03/1 till 12.91 (ATE 57) |
90 + 0.2
|
| Support of a 4-piston design |
Models 140.02/04/05/06/07 (Girling/Lucas
in diameter 40/44) |
43.98-44.03
|
Models 140.03/1 from 01.92 (Girling/Lucas
in diameter 40/44) |
43.98-44.03
|
| Diameter of a brake disk, mm |
Support of a 2-piston design (model
140.03/1 till 12.91 (ATE 57) |
310
|
| Support of a 4-piston design |
Models 140.02/04/05/06/07 (Girling/Lucas
in diameter 40/44) |
100 + 0.2
|
Models 140.03/1 from 01.92 (Girling/Lucas
in diameter 40/44) |
100 + 0.2
|
| Thickness of a brake disk, mm |
Support of a 2-piston design
(models 140.03/1 till 12.91 (ATE 57) |
28
|
|
Dependence of pressure in a hydraulic actuator from effort of pressing to a pedal of a foot brake (at pressure in the inlet pipeline 0.75-0.8 a bar), a bar |
| 100 N |
Models 140.02/03/1 (ATE T52 4A 225 210
or Lucas LSC 115) |
35-45
|
Models 140.04/05/06/07 (ATE T52/4a 255 225)
|
35-47
|
| 150 N |
Models 140.02/03/1 (ATE T52 4A 225 210
or Lucas LSC 115) |
53-63
|
Models 140.04/05/06/07 (ATE T52/4a 255 225) 57-69
|
|
| 200 N |
| Models 140.02/03/1 (ATE T52 4A 225 210 or Lucas LSC 115) |
71-81
|
| Models 140.04/05/06/07 (ATE T52/4a 255 225) |
78-92
|
| 250 N |
Models 140.02/03/1 (ATE T52 4A 225 210
or Lucas LSC 115) |
87-98
|
| Models 140.04/05/06/07 (ATE T52/4a 255 225) |
95-105
|
| Back nave |
320
|
| Forward support to the holder |
35
|
| Back support to the holder (TDI) |
115
|
|
The holder of a support to a fist |
| Forward wheels |
115
|
| Back wheels |
| To 07.93 g |
115
|
| After 08.93 g |
50
|
| Vacuum tube to the vacuum amplifier |
30
|
Nut of fastening of the vacuum amplifier
to an arm |
20
|
| Brake hose to a brake tube |
14
|
| Brake hose to a brake support |
18
|
Bolt of fastening of the sensor of frequency
rotations of a forward wheel |
22
|
Bolt of fastening of the sensor of frequency
rotations of a back wheel |
8
|
|
Nuts of tips of steering drafts |
| S280, S320, S300 TDI |
50
|
| S420, S500, S600 |
55
|
|
Wheel bolts |
| S280, S320, S420, S500, S600 |
150
|
| S300 TDI |
110
|
