Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   + Forward suspension bracket
   - Back suspension bracket
      Stupichny assembly - installation details
      Removal and installation of a screw spring
      The stabilizer of cross-section stability - installation details
      Removal and shock-absorber installation
      Removal and installation of a back amortization rack (model with hydraulic adjustment of a suspension bracket)
      Check of the hydraulic pump
      Removal and installation of the accumulator of pressure of a hydraulic actuator of a back suspension bracket (model with a code 217a «A self-regulating back suspension bracket with ADS» and a code 480 «Management of a road clearance of a back suspension bracket»)
      Removal and control unit installation by a road clearance of a back suspension bracket
      Dempfernye valves - installation details
      Removal and installation of the valve of adjustment of a road clearance
      Regulator of a road clearance of a back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment



56822268



Removal and installation of a back amortization rack (model with hydraulic adjustment of a suspension bracket)

Removal

Back amortization rack (models with hydraulic adjustment of a suspension bracket)


 PERFORMANCE ORDER

1. Remove the decorative panel in a luggage carrier.
2. Unscrew the top nut of fastening of the shock-absorber.
3. Merge liquid from the hydraulic pipeline.
4. Disconnect forcing pipeline (Р4) in a place where the steel tube incorporates to the rubber.
5. Uncover the bottom lever (72c).
6. Disconnect and remove a rack (5) from the bottom lever (72).

Installation

Installation is carried out as it should be, the return to removal. Replace a nut (5n).