|
1. Disconnect a negative wire from the battery.
2. If the safety cushion is established, unscrew a bolt (1) and remove a plate (2).
3. Unscrew bolts (3).
4. Disconnect the socket of conducting (S4x1) from the combined switch, - for this purpose press a rack (shooter).
5. At the corresponding complete set растсоедините I will corrode conductings темпостата (S40x1).
6. Take a pipe (4).
7. Remove the switch темпостата (S40) from a pipe (4).
8. Remove the combined switch (S4) from a pipe (4).
|
