Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
- Routine maintenance
   Specifications
   Active system of the prevention of term of approach planned THAT (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels
   Replacement of impellent oil and oil filter
   Check of brake system
   Check of fuel system, replacement of the fuel filter
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid, liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of ATF, AT filter replacement
   Visual check of tightness of automatic transmission
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of central air of air
   Greasing of limiters of doors and cylinders of locks
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the salonny filter
   Replacement of brake liquid
   Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models)
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



56822268



Check of a condition of protective covers of power shafts

Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (CV JOINT) from hit on them of dirt, water and other extraneous subjects causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers therefore it is recommended to wash periodically covers with water with soap.

 PERFORMANCE ORDER

1. Examine covers on existence of gaps and cracks, and also the weakened collars (2). In case of detection of signs of cracks or leakage of greasing the cover (1) should be replaced.

2. At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or an otvorachivaniye of a lock nut of a shaft.