Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
- Systems of cooling, heating
   Specifications
   - System of cooling of the engine
      Replacement of cooling liquid - general comments
      Removal and replacement of hoses of system of cooling
      Thermostat check
      Removal and thermostat installation
      Removal and installation of a radiator of system of cooling - installation details
      Removal and installation of the water pump
   + Systems of ventilation, heating and air conditioning
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


56822268 Сантехнические перегородки

Removal and installation of a radiator of system of cooling - installation details

Details of installation of a radiator of system of cooling

Details of installation of a radiator of system of cooling on petrol models of the M104.94/99 series


1 — Nizhny a protective guard
2 — the Top cross-section beam
3 — the Condenser
4 — the Radiator
5 — a fan Casing
6 — a casing Ring
7, 8 — AT Oil pipelines

9, 10, 11, 12 — Branch pipes of system of cooling
13 — Plastic tapes
14, 15, 18 — Clamps
19 — Rubber support
20 — the Lever
21 — the Adjusting bolt



Details of installation of a radiator of system of cooling on diesel models of the Om603.971 series

1, 2, 2a, 4, 15, 16 — Clamps
5 — Fingers
6, 7 — Panels
8 — the Collar
9 — the Radiator

10, 14 — Branch pipes of system of cooling
11 — a fan Casing
17 — the Ring
18 — the Cover

Removal (on an example of diesel model with the Om606.961 series engine with AT)

Details of installation of a radiator of system of cooling on diesel models of the Om606.961 series



 PERFORMANCE ORDER

1. Remove the bottom protective guard of the engine.
2. Merge cooling liquid.
3. Lift the receiver supply of the compressed air (110).
4. Remove clamps (15) and (16).
5. Remove the fan coupling.
6. Remove a fan casing.
7. Disconnect AT (13) and (14) pipelines from a radiator.
8. Disconnect branch pipes (10), (11) and (12).
9. Remove a forward cross-section beam (2).
10. Remove a radiator (10).

Installation

Installation is carried out as it should be, the return to removal.