Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
- Brake system
   Arrangement of components of antiprobuksovochny system ASR/ETS
   Arrangement of components of the amplifier of emergency braking (BAS)
   Arrangement of components of ESP system
   Dismantling and assembly of the main brake cylinder (GTTs) of the Tandem type (model 140.028/032/033/135)
   Removal, installation and check of serviceability of functioning of the servo-driver of the vacuum amplifier of brakes
   Removal and installation of a brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of blocks of the parking brake
   Removal and installation of a forward cable of a drive of the parking brake
   Adjustment of the parking brake
   Wheel ABS sensors - installation details
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of blocks of the parking brake


Removal and installation of brake shoes on models since 01.11.93 вып.

Removal and installation of brake shoes on models for 31.10.93 вып.


1. Remove back wheels.
2. Remove brake disks of back wheels.
3. Remove a heat-shielding guard of system of release.
4. Pull an automatic regulator. Turn an ekstsentrikovy finger (g) counter-clockwise (approximately on 1/2 turns), using a key, and move it on some time ago in the longitudinal direction so that the clown (b) was blocked in a spring ring (d) with a ledge (h).
5. Disconnect a returnable spring (111) by means of the lever (041).
6. Unhook a spring (107) by means of the lever (040).
7. Remove brake shoes (103) from flanges of power shafts (68).
8. Disconnect a returnable spring (112).


Installation is carried out as it should be, the return to removal.