Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Security measures at carrying out body works
   Replacement of brushes of screen wipers
   Replacement of the salonny filter
   Removal and dashboard installation
   Removal and installation of the combined podrulevy switch
   The switch of light of headlights - installation details
   Removal and installation of a combination of devices
   Control lamps and alarm indicators of an instrument guard - installation details
   Measuring instruments of a combination of devices - the scheme of an arrangement and an installation detail (model on 10.93 g вып.)
   Removal and control unit installation by the automatic conditioner
   Removal and installation of the push-button control panel by the conditioner (models for 31.08.95 вып. with the Bosch control unit)
   Replacement of control lamps of the push-button control panel with the conditioner
   Check of a pneumatic regulator of an inclination of optical axes of light of headlights
   Switches of the central console - installation details
   Removal and installation of the central console
   Loudspeakers - installation details
   Removal and installation of panels of an internal upholstery of doors
   Bumpers - installation details
   The combined relay - installation details
   Forward doors
   Back doors - installation details
   Cowl adjustment
   Block headlights - installation details
   The back combined lamps - installation details
   Removal and installation of the sensor of turns of the compressor of the conditioner (model for 31.08.95 вып.)
   Check and adjustment of provision of headlights
   Adjustment of a cover of a luggage compartment
   Forward wings and loker of protection of wheel arches - installation details
   Decorative front grille - installation details
   «Mercedes» emblem
   Removal and installation of external rear-view mirrors
   Removal and installation of seats
   Removal and installation of head restraints
   Deflectors of air lines of the dashboard - installation details
   Forward indexes of turns - installation details
   Backing fires - installation details
   Cover of a ware box - installation details
+ Onboard electric equipment



56822268
Отличительные черты тикового настила


Removal and dashboard installation

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove a steering wheel, a guard of the devices, the combined switch, lateral moldings, covers of loudspeakers from both parties, a cover of a ware box, the bottom cover of the dashboard, a cover on the gear shifting lever, lateral and central deflectors.
3. Remove the deflector (1), unscrew a bolt (2) and remove a clip (3).
4. Disconnect sockets of conducting of the rotating switch of light of headlights of a regulator of light of headlights and a bulb of illumination of the switch of headlights.
5. Remove a drive of a regulator of a steering wheel. For this purpose press the button, unscrew a bolt (4), uncover (5) up.
6. Unscrew a bolt (6) and remove the case (7). Do not unhook a management cable.
7. Remove a cable (8) otpuskaniye of the parking brake and remove the handle (9).
8. Unhook a cover on the wooden panel.
9. Unscrew fixing bolts.
10. Remove the wooden panel (10).
11. Unscrew bolts (11) and (12), remove the panel of regulators (13) and disconnect sockets of conducting and management cables from a heater.
12. Remove the lateral deflector (14) and a clip (15).
13. Unscrew bolts (shooters) (8 mm) in the top part of the console.
14. Unscrew bolts (shooters) of fastening of the dashboard (10 mm).
15. Lift the dashboard over the central console (arrow), then pull back the panel from the passenger and remove it from a steering column and the ignition lock.
16. Disconnect electroconducting from the dashboard from the driver (shooter).
17. The dashboard in the removed look is shown on an illustration.

Installation

 PERFORMANCE ORDER

1. Adjust reference points so that the top part of each panel coincided with the wooden panel on doors.
2. At first establish the dashboard on a forward wall from the driver (to put on it a steering column), the ignition lock, the top air lines and fixing flanges on the central console.
3. Establish insulating laying (16) and (17), electroconducting and management cables.
4. Wrap seven bolts (arrow) and tighten them.
5. Attach sockets of conducting of the rotating switch of light of headlights, a regulator of light of headlights and a bulb of illumination of the switch of light of headlights.
6. Establish deflectors from both parties. Establish a clip on a forward wall of a body.
7. Establish regulators and attach cables of management of a heater and conducting sockets.
8. Establish the decorative wooden panel.
9. Further installation is carried out as it should be, the return to removal.