Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
   Specifications
   Removal and transmission installation
   Forward cover of a transmission - installation details
   Removal and installation of a back cover of a transmission
   + РКПП 717.438
   - РКПП 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of a transmission
      Removal and installation of a back cover of a transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of a transmission
      Removal and installation of shaft of a transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of a transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


56822268


Replacement of an epiploon of a back cover of a transmission

Details of installation of an epiploon of a back cover of a transmission

Details of installation of an epiploon of a back cover of a transmission

2 — the Driveshaft
5, 21, 200a — Bolts
6, 20, 36 — Washers
7, 35, 88, 200 — Nuts

18 — an engine Support
19 — an engine Arm
56 — the Epiploon
87 — the Flange

Removal

Details of installation of an arm of a support of a suspension bracket of the power unit

18 — the Support of a suspension bracket of the power unit
19 — the Arm
21 — Fixing bolts
35 — the Fixing nut


 PERFORMANCE ORDER

1. Lift a transmission by means of a jack.
2. Unscrew a nut of fastening of a support of the engine (35). Unscrew bolts (21) with washers and remove an arm (19) together with a support of an engine mount (18).

3. Unscrew the driveshaft from a transmission. Unscrew a bolt (8) fastenings of a shaft of a speedometer (9) and remove it.

4. Weaken adjusting plugs in a driveshaft flange. For this purpose use a drift in diameter of 10 mm and length about 150 mm.

5. Weaken a nut of the driveshaft and move the driveshaft from a flange in the direction to a back part of the car.

6. Unscrew bolts of basic assembly (200a).

7. Unscrew a nut of fastening of a flange of a transmission.

8. Remove a transmission flange.
9. Having hooked a screw-driver, take an epiploon from a transmission cover by means of a screw-driver.

Installation

Installation is carried out as it should be, the return to removal.