Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   - Forward suspension bracket
      Gap adjustment in the bearing of a forward wheel
      Removal and installation of the bottom spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross-section lever
      Replacement of the bottom cross-section lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross-section stability
      Removal and shock-absorber installation
      Regulator of a road clearance of a forward suspension bracket - installation details
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment


56822268


Replacement of the bottom cross-section lever

Removal

 PERFORMANCE ORDER

1. Separate the lever from assembly of a rotary fist (see. Section Removal and installation of the bottom spherical support).
2. Turn out fixture (47а) and separate from the lever the shock-absorber (47).
3. Give nuts of ekstsentrikovy bolts (19, 19b, 20 and 20b) and remove assembly of the bottom lever, - try to remember adjusting provisions of bolts.
4. In case of need liberate from the lever a spherical support (see. Section Removal and installation of the bottom spherical support).

Installation

 PERFORMANCE ORDER

1. Installation is made upside-down. Replace all самоконтрящийся fixture.
2. Do not forget to make adjustment of corners of installation of forward wheels of the car.


The tightening of nuts of ekstsentrikovy bolts should be made after car lowering on the earth.