Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)
      Dismantling and assembly of the pump of the amplifier of a steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the bottom steering shaft
      Removal and installation of a drive of telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe (model to identification number 123446)
      Installation of the top arm of fastening of a pipe (model from identification number 123447)
      Removal and installation of the blocking cylinder (model till 31.08.95 вып.)
      Removal and installation of the blocking cylinder (model since 1.09.95 вып.)
      Contact spring
      Removal and installation of average steering draft
      Removal and installation of the pendular lever of a steering drive
      Removal and installation of cross-section steering draft
+ Body
+ Onboard electric equipment



56822268



Removal and installation of the bottom steering shaft

Removal

 PERFORMANCE ORDER

1. On a steering of the 1st version unhook an ear (shooter) from a blocking plate (96a), unscrew a nut (96)
2. On a steering of the 2nd version unscrew a nut (96).

Installation

 PERFORMANCE ORDER

1. On a steering of the 1st version fix new laying (96a) on the bottom shaft and fix it.
2. On a steering of the 1st and 2nd versions at first wrap a nut (96) on the top steering shaft (70g). Establish the bottom steering shaft on a nut (96) and wrap them together, continuing to rotate both parts until they will not be blocked in shlitsevy connection.
3. Turn the bottom steering shaft (80a) so that the fork of the hinge was established down. Insert the adjusting tool (075) into a groove of the top shaft and establish a fork of the bottom shaft (80a) so that it was established in parallel «X» to the adjusting tool (075).
4. Establish a steering wheel on a steering shaft. Tighten a nut (96).
5. On a steering of the 1st version: block a nut (96) for what press laying (96a) in a groove over a nut.