Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Automatic transmission 722.6

Removal and AT installation with the converter of rotation (hydrotransformer)

Removal

Details of installation of assembly of AT with the hydrotransformer


4 — the Drain stopper of the pallet 9 — the Drain stopper of the hydrotransformer 26 — I Will corrode conductings 33 — the gear shifting Lever 46 — the grounding Tyre on "weight" 49 — the Oil pipeline 61 — Maslozalivnaya a tube 62 — the Guard 63 — Draught of gear shifting	64 — the Back arm of fastening of an exhaust pipe 65 — an engine Arm with a support 66 — the Driveshaft 80 — the Cable of inclusion of blocking at a parking 81 — a hydrotransformer Cover 94 — the Exhaust pipe 95 — the Bolt

PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove a maslozalivny tube (61) from the engine.
3. Unscrew a drain stopper (4) of the pallet of transmission and merge transmission oil.
4. Unscrew a drain stopper (9) of the hydrotransformer and merge transmission oil.
5. Remove a guard (62) and disconnect the 13-contact socket (26).
6. Disconnect a cable (80) inclusions of blocking at a parking.
7. Unscrew bolts (95) fastenings of the hydrotransformer to a leading disk, then uncover the hydrotransformer (81).
8. Unscrew the left and right oil pipelines (49) from an oil radiator.
9. Remove draft of gear shifting (63), having disconnected for this purpose a clamp.
10. Remove an arm (64) fastenings of an exhaust pipe.
11. Disconnect system of release (94).
12. Remove a fan casing from a radiator (see. Head of System of cooling, heating).
13. Unscrew a back arm of the engine with a support (65).
14. Unscrew the driveshaft (66).
15. Disconnect a connection wire on "weight" (46) from transmission.
16. Unscrew bolts of fastening of transmission to the block of cylinders and remove it down at an angle.
17. Remove the hydrotransformer.

Installation

Installation is carried out as it should be, the return to removal.