Mercedes S-Class W-140

1. Weaken directing plug (21) and remove it from transmission.
2. Remove the pallet (3).
3. Remove the oil filter (5).
4. Unscrew bolts (19a) and remove the AT (19) electrohydraulic control unit.
5. Remove a flange (48).
6. Vypressuyte a radial epiploon (20), remove laying (67a), a lock ring (68) and выпрессуйте the ball bearing (67) of the transmission case.
7. Remove laying (18).
8. Unscrew a bolt (1a) and (2a) from the case the hydrotransformer and transmissions.
9. Remove the case of transmission (2) from the case the hydrotransformer (1).

1. Grease with hermetic and insert into a groove everything together teflon rings (12a).
2. Establish a transmission (2) on the hydrotransformer (1), combine disks of brakes В2 and В3.
3. Wrap bolts (1a) and (2a).
4. Measure a gap between a doggie of the parking brake and the ball bearing. It should be within 0.3-0 5 mm.
5. Establish laying (18), press the ball bearing in a back part of the case of transmission.
6. Establish laying (67a).
7. Establish a radial epiploon (20) in the transmission case.
8. Establish a flange (48).
9. Establish and tighten bolts of fastening of the AT (19) electrohydraulic control unit.
10. Further assembly is carried out as it should be, the return to dismantling.