Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
- Автоматичеcкая transmission
   Specifications
   Search of malfunctions - the general information
   + Automatic transmission 722.5
   - Automatic transmission 722.6
      Removal and AT electrohydraulic control unit installation (transmission is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Dismantling and assembly of the case of transmission and hydrotransformer
      Dismantling and assembly of multidisk brakes В2, В3 and gear wheels of blocking of transmission in the situation "P"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of multidisk brake В1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of multidisk brake В1
      Dismantling and assembly of multidisk brake В2
      Dismantling and assembly of a target shaft with central and back blocks of planetary gear wheels
      Removal and installation of multidisk couplings К1, К2 and К3
      Dismantling and assembly of coupling К1
      Dismantling and assembly of a leading shaft with coupling К2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling К3
      Removal and installation of the mechanism of blocking of transmission in the situation "P"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


56822268


Dismantling and assembly of multidisk brakes В2, В3 and gear wheels of blocking of transmission in the situation "P"

Dismantling

Multidisk brakes В2, В3 and a blocking gear wheel in the situation "P"

2 — the transmission Case
11 — Bolts
14 — Multidisk brake В2
15 — a blocking Gear wheel in the situation "P"

133 — Multidisk brake В3
133a — the Lock ring
133b — Spring laying


 PERFORMANCE ORDER

1. Remove a transmission from the hydrotransformer.
2. Remove multidisk brake В3 (133) and spring laying (133b), having taken out a lock ring (133a) from the transmission case.
3. Unscrew bolts (11).
4. Take multidisk brake В2 (14) of the transmission case.
5. Remove a blocking gear wheel in the situation "P" (15).

Assembly

Check of a gap by "L" in multidisk brake В3

2 — the transmission Case (an external support of brake В3)
14a — the Piston
133a — the External disk in thickness of 6.5 mm

133b, 133c — External disks in thickness of 1.8 mm
133d — the Disk spring
133e — Frictional disks


Assembly is carried out as it should be, the return to dismantling.

Check and measure a gap in multidisk brake В3. The nominal size of a gap of "L" in multidisk brake В3 lies within a range 1.0 - 1.4 mm. Establish disks of brake В3 together in an order presented on сопр. illustrations, also insert them in turn, measure a gap of "L" between a lock ring (133f) and an external disk (133a) in three points, - during measurement the lock ring (133f) should concern the top holder of the bearing in a groove of an external support of a brake (2).

In case of need adjust a gap by selection of lock rings. Lock rings in thickness 3.2, 3.5, 3.8, 4.1, 4.4 and 4.7 mm are issued.