Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   - Forward suspension bracket
      Gap adjustment in the bearing of a forward wheel
      Removal and installation of the bottom spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross-section lever
      Replacement of the bottom cross-section lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross-section stability
      Removal and shock-absorber installation
      Regulator of a road clearance of a forward suspension bracket - installation details
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment



56822268


Gap adjustment in the bearing of a forward wheel

Gap adjustment in the bearing of a forward wheel

9d — the Nut
9e — a nave Cover
9i, 48a — Bolts
015 — an indicator Support
022 — the Indicator


 PERFORMANCE ORDER

1. Remove a forward wheel.
2. Screw a bolt (48a) wheel fastenings.
3. Block a forward brake disk a brake support, having pressed a brake pedal.
4. Uncover (9e) naves.
5. Unscrew a nut (9d).
6. Attach the indicator (022) with a support (015).
7. Adjust a gap in the wheel bearing rotation of a nut (shooter) in the necessary direction. The nominal size of a gap in the bearing of a forward wheel makes 0.01-0.02 mm.
8. Tighten a bolt (91) and check a gap once again.
9. Press a brake pedal several times.