Mercedes S-Class W-140

1991-1999 of release

Repair and car operation


Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   - Forward suspension bracket
      Gap adjustment in the bearing of a forward wheel
      Removal and installation of the bottom spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross-section lever
      Replacement of the bottom cross-section lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross-section stability
      Removal and shock-absorber installation
      Regulator of a road clearance of a forward suspension bracket - installation details
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment


56822268


Replacement of the top cross-section lever

Removal

 PERFORMANCE ORDER

1. Separate from the top lever (6) a rotary fist (5), - in case of need use a stripper No. 140 589 02 31 00. Try not to allow tension of a brake hose and electroconducting.
2. Turn out nuts (6b) fastenings of the holder of bearing axial assembly (6а) to a frame.

Installation

 PERFORMANCE ORDER

1. At installation act as it should be, the return to an order of dismantle of components.
2. Having established the lever on a frame, tighten nuts of fastening of an axial part with effort of 50 Nanometers, then weaken axial самоконтрящуюся a nut (6е) and adjust position of the lever so that the distance And appeared equal 63 mm. Tighten самоконтрящуюся a nut with effort of 120 Nanometers.
3. Самоконтрящуюся a nut of fastening of the lever to a rotary fist tighten with effort of 125 Nanometers.