Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Corners of installation of wheels of the car, road clearance
   - Forward suspension bracket
      Gap adjustment in the bearing of a forward wheel
      Removal and installation of the bottom spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross-section lever
      Replacement of the bottom cross-section lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross-section stability
      Removal and shock-absorber installation
      Regulator of a road clearance of a forward suspension bracket - installation details
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment


Removal and installation of assembly of a rotary fist

Details of installation of assembly of a rotary fist


At removal of a rotary fist the shock-absorber should be established!


1. Remove a nave of a forward wheel (9).
2. Remove a back protective guard (35).
3. Disconnect connecting draft (28) stabilizers of cross-section stability from a rotary fist (5).
4. Remove the sensor of speed (L6/1) and the indicator of wear of a brake slip.
5. On models from ASD remove the sensor of acceleration of a wheel (B24/1).
6. Disconnect steering draft (10) from a rotary fist.
7. Disconnect the bottom spherical support (7) from a rotary fist (5).
8. Disconnect a rotary fist (5) from the top lever (6).
9. Remove a rotary fist (5).


Installation is carried out as it should be, the return to removal.