Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
+ Avtomaticheckaya transmission
- Coupling
   + Coupling
   Driveshaft
   + Power shafts
   - Differential
      Dismantling, assembly and differential check
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
      Determination of thickness of adjusting laying and its installation in the reducer case
      Check and adjustment of a gap of a flange
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels (model 140.28/032/O33 till 31.05.94 вып., 140.042/043/063/1 and diameter of differential of 210 mm)
      Dismantling and differential assembly with automatic blocking
      Replacement of the cylinder of differential with automatic blocking (models 140.028/032/033 till 31.05.94 вып. and 140.1 with a code 211a)
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check and adjustment of a gap of a flange

Check and gap adjustment between a flange (33) and a conic gear wheel of a power shaft (17) by means of a lock ring

Check a gap between a flange (33) and a conic gear wheel of a power shaft (17), - in case of need pick up a lock ring (30a) the corresponding thickness. Rings in thickness from 1.4 mm to 2.7 mm 1 with a step of 0.05 mm are issued. The nominal rate of size of a gap between a flange and the case of differential makes 0.03 - 0.3 mm.