Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
   Specifications
   Removal and transmission installation
   Forward cover of a transmission - installation details
   Removal and installation of a back cover of a transmission
   - РКПП 717.438
      Removal and installation of an intermediate case
      Check of a gap of leading and intermediate shaft
      Dismantling and assembly of a conducted shaft
      Removal and installation of leaders and conducted gear wheels
      Replacement of the RKPP ball bearings with No. 6141001
      Replacement of conic roller bearings of a transmission to No. 6141000
      The gear shifting mechanism - details of installation of elements
   + РКПП 717.454
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



56822268



Replacement of the RKPP ball bearings with No. 6141001

Dismantling

Replacement of ball bearings of a transmission with No. 6141001

1a — the Ball bearing of a leading shaft
1b, 43 and 127 — Lock rings
2 — the Leading shaft
20 — the Conducted shaft
40 — the Intermediate shaft

43a — the Back ball bearing of a conducted shaft
43c — the Back ball bearing of an intermediate shaft
43d — the External holder of the bearing
49 — the Intermediate plate
128 — the Forward ball bearing of an intermediate shaft


 PERFORMANCE ORDER

1. Remove the ball bearing (1a) from a leading shaft.
2. Remove a lock ring (43b), выпрессуйте the ball bearing (43a).

3. Remove the roller bearing (43с) and an external holder of the bearing (43d).
4. Remove a lock ring (127) and the ball bearing (128) of an intermediate shaft.
5. Measure distance between the synchronizer of the 3/4th transfers and a contact surface of an intermediate case (see. The section Removal and installation of leaders and conducted gear wheels).

Assembly

Assembly is carried out as it should be, the return to removal.