1. Remove forward top covers (30) and (30a).
2. Remove directing levers of heads of the block of cylinders (40).
3. Unscrew an asterisk (3) final camshafts of the left head of the block of cylinders. |
| 4. Using a key, establish camshafts so that cams of cylinders (3) and (9), respectively, (shooters) held hydrojacks on the average situation. |
|
| 5. Unscrew bolts of fastening of covers of camshafts, except cylinders (3) and (9) (arrow) and remove them. Uncover (15) together with the left inlet camshaft (9). |
|
6. Weaken bolts of fastening of covers No. 3 and No. 9 (shooters) serially on one turn and remove them.
7. Remove inlet camshafts.
8. Check hydrojacks. |
