Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
Specifications
Removal and transmission installation
Forward cover of a transmission - installation details
Removal and installation of a back cover of a transmission
+ РКПП 717.438
- РКПП 717.454
Removal and installation of the sensor of speed of the car (VSS)
Removal and installation of a forward cover of a transmission
Removal and installation of a back cover of a transmission
Removal and installation of an intermediate case
Replacement of an epiploon of a back cover of a transmission
Removal and installation of shaft of a transmission
Dismantling and assembly of an intermediate shaft
Verification of dimensional characteristics of a transmission
Replacement of conic roller bearings of an intermediate shaft
Replacement of ball bearings of an intermediate shaft
Adjustment of the mechanism of gear shifting
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of the sensor of speed of the car (VSS)
Models with VSS of mechanical type
Details of the VSS installation of mechanical type Details of the VSS installation of mechanical type
|
|
|
38 — Kosozubaya a gear wheel of a drive of a speedometer
38a — Laying |
56, 83 — Epiploons
84 — the Gear wheel of a drive of a speedometer
85 — the Cover |
Removal
|
|
| 1. Remove an epiploon (56) from a back cover of a transmission (82). |
|
| 2. Remove a kosozuby gear wheel of a drive of a speedometer (38) and laying (38a) from a back cover of a transmission (82). |
|
| 3. Take a cover (85) by means of a drift. Remove a gear wheel of a speedometer (84) from a back cover of a transmission (82). |
|
| 4. Remove a radial epiploon (83) from a back cover of a transmission (82). For simplification of its removal, screw bolt М12 in a radial epiploon and fix a bolt head in a vice. |
|
|
Installation
|
|
|
1. Press an epiploon against the stop. |
|
|
2. Establish a gear wheel of a speedometer (84) in a back cover of a transmission (82). Establish a cover (shooter) by means of a drift so that the gap between a gear wheel and a back cover of a transmission was equal 0.5 mm.
|
|
|
3. Insert a kosozuby gear wheel of a drive of a speedometer (38) facet in the direction to the roller plug (shooter) and press laying (38a) in a back cover of a transmission (62).
4. Further installation is carried out as it should be, the return to removal.
|
|
Models with electronic VSS Details of installation of electronic VSS
|
|
|
38a — Laying
38b — the Rotor
38c — the Plug |
56 — the Epiploon
62b — the Inductive sensor
82c — the Sealing ring |
Removal
|
|
|
1. Remove a radial epiploon (56) from a back cover of a transmission (82). |
|
|
2. Remove laying (38a), a rotor (38b) and the plug (38c) from a back cover of a transmission (82). |
|
|
3. By means of a drift beat out a cover (02b) the inductive sensor from a transmission cover. |
|
|
Installation
|
|
|
1. Carefully press a cover (82b) the inductive sensor and a new sealing ring in a transmission cover by means of a drift. |
|
|
2. Further installation is carried out as it should be, the return to removal. |
|
|
|
