Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
   Specifications
   Removal and transmission installation
   Forward cover of a transmission - installation details
   Removal and installation of a back cover of a transmission
   + РКПП 717.438
   - РКПП 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of a transmission
      Removal and installation of a back cover of a transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of a transmission
      Removal and installation of shaft of a transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of a transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of a forward cover of a transmission

Details of installation of a forward cover of a transmission

Details of installation of a forward cover of a transmission


92 — the Forward cover of a transmission 92a — the Bolt 93 — the Epiploon 94, 96 — Laying	100 — РКПП 150 — the Bearing of switching off of coupling 155 — the Lever of switching off of coupling

Removal

PERFORMANCE ORDER

1. Fix a transmission on a support.
2. Merge oil from a transmission (about 1 7 l).
3. Remove the bearing of switching off of coupling (150) and the lever of switching off of coupling (155).
4. Unscrew a forward cover (92).
5. Having hooked a screw-driver, take an epiploon (93).

Installation

PERFORMANCE ORDER

1. By means of a suitable opravka press a new epiploon against the stop.
2. Grease and establish laying (94) and (96) in a cover of a transmission (02).
3. Further installation is carried out as it should be, the return to removal.