Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Gear shifting box
   Specifications
   Removal and transmission installation
   Forward cover of a transmission - installation details
   Removal and installation of a back cover of a transmission
   + РКПП 717.438
   - РКПП 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of a transmission
      Removal and installation of a back cover of a transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of a transmission
      Removal and installation of shaft of a transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of a transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Avtomaticheckaya transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

we plan cul

Removal and installation of a back cover of a transmission

Details of installation of a back cover of RKPP

Details of installation of a back cover of a transmission


50, 113b, 103a — Laying 71 — the Lever of inclusion of the 1st transfer 72, 82a, 113a — the Bolt 82 — the Back cover of a transmission	87 — the Flange 88 — the Nut 100 — the Transmission 113 — the Blocking bearing

Removal

PERFORMANCE ORDER

1. Fix a transmission on a support.
2. Remove the blocking bearing (113).
3. Unscrew a nut (88) and remove a flange (87).
4. Remove the lever of inclusion (71) 1st transfers.
5. Unscrew a bolt (101) and remove a shaft (103).
6. Unscrew bolts (82a) and uncover transmissions (82).

Installation

PERFORMANCE ORDER

1. Replace laying (50), grease bolts (82a) with hermetic 001 369 2520 (Hylomar) and tighten bolts the moment of 23 Nanometers.
2. Replace a sealing ring (103a), grease a bolt (101) hermetics 001 989 25 20 (Hylomar) and tighten it the moment of 5 Nanometers.
3. Replace a nut (88) and tighten it the moment of 160 Nanometers.
4. Further installation is carried out as it should be, the return to removal.