Mercedes S-Class W-140

1991-1999 of release

Repair and car operation

Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
- Автоматичеcкая transmission
   Specifications
   Search of malfunctions - the general information
   - Automatic transmission 722.5
      Removal, check of a condition and installation of the converter of rotation (hydrotransformer)
      Removal and installation of a centrifugal regulator
      Removal and installation of the sensor switch of blocking of a starter (start permission)
      Vacuum knot - installation details
      Removal, service and installation of the secondary pump (AT to No. 3652931)
      Removal and installation of a forward cover with the secondary pump
      Removal and LB3 piston installation
      Removal and installation of a back cover of transmission
      Dismantling and assembly of klapanny assembly of AT
      Dismantling and transmission assembly
      Installation and gap check in multidisk brake В3
      Gap measurement in brake В1
      Coupling of raising transfer
      Removal, installation and check of components of a brake of BS of raising transfer and KS coupling
      Dismantling and assembly of the coupling of a free wheeling
      Dismantling and assembly of planetary mechanisms
      Dismantling and assembly of coupling К1
      Coupling К2
      Lever of the selector of gear shifting
   + Automatic transmission 722.6
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Dismantling and assembly of planetary mechanisms

Dismantling

Design of a planetary reducer


2 — the Forward planetary mechanism 3 — the Lock ring 4, 6, 8, 23 — Persistent bearings 5, 9 — Radial bearings 7 — the Connecting support 10 — the Solar gear wheel 11, 17, 22 — Washers 12, 20 — Sealing rings 13 — the Internal ring of the coupling of a free wheeling 14 — the Roller bearing	15 — the Spring 16 — Cylindrical rollers 18 — the Persistent washer 19 — the Internal disk of coupling К2 21 — the Blocking ring 24 — the Support 87 — the Leading shaft 99 — the Lubricant ring 167 — the Target shaft with the planetary mechanism 167a — Teflon rings

PERFORMANCE ORDER

1. Disassemble a transmission (section 4).
2. Remove a lubricant ring (99).
3. Remove teflon rings (167a) from a target shaft (167).
4. Establish gear wheels with target shaft (167) on the assembly device.
5. By means of a screw-driver remove a lock ring (3).
6. Remove the forward planetary mechanism (2) and take the persistent bearing (3).
7. Remove the persistent bearing (4) and a leading shaft (37).
8. Remove the radial bearing (5) and the persistent bearing (6).
9. Remove a target shaft with the planetary mechanism (167).
10. Remove the radial bearing (9), the persistent bearing (8) and a solar gear wheel (10).
11. Remove the coupling (F2).

Assembly

Assembly is carried out as it should be, the return to removal.