Removal and installation of the sensor switch of blocking of a starter (start permission)
Removal
Details of installation of the sensor switch of blocking of a starter
5 — the Clamp 6, 10 — Bolts 7 — the Nut 8 — the Contact socket of electroconducting
9 — Draught of switching 52 — the gear shifting Lever 54 — the Driving lever S16/4 — the Switch of blocking of a starter
PERFORMANCE ORDER
1. Disconnect from the sensor switch electroconducting (8). 2. Unhook draft (9), having disconnected a clamp (5). 3. Disconnect the lever of gear shifting (52), having unscrewed a nut (7) and a bolt (6). 4. Remove the switch of blocking of a starter (S16/4), having unscrewed bolts (10).
Installation
Installation is carried out as it should be, the return to removal.
