Mercedes S-Class W-140

1991-1999 of release

Repair and car operation



Mercedes S-Class
+ Mercedes-Benz Cars of a class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ gear shifting Box
- Автоматичеcкая transmission
   Specifications
   Search of malfunctions - the general information
   - Automatic transmission 722.5
      Removal, check of a condition and installation of the converter of rotation (hydrotransformer)
      Removal and installation of a centrifugal regulator
      Removal and installation of the sensor switch of blocking of a starter (start permission)
      Vacuum knot - installation details
      Removal, service and installation of the secondary pump (AT to No. 3652931)
      Removal and installation of a forward cover with the secondary pump
      Removal and LB3 piston installation
      Removal and installation of a back cover of transmission
      Dismantling and assembly of klapanny assembly of AT
      Dismantling and transmission assembly
      Installation and gap check in multidisk brake В3
      Gap measurement in brake В1
      Coupling of raising transfer
      Removal, installation and check of components of a brake of BS of raising transfer and KS coupling
      Dismantling and assembly of the coupling of a free wheeling
      Dismantling and assembly of planetary mechanisms
      Dismantling and assembly of coupling К1
      Coupling К2
      Lever of the selector of gear shifting
   + Automatic transmission 722.6
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



56822268



Lever of the selector of gear shifting

Removal

Details of installation of the lever of the selector of gear shifting

1 — the Case
2 — the Lever of the selector of gear shifting
6, 42 — Bolts
10 — Draught of gear shifting

40B, 40L — Cables
41 — the Collar
49 — the Clamp
S16/9 — the D-contact switch


 PERFORMANCE ORDER

1. Disconnect draft of switching (10), having removed a clamp (49).
2. Disconnect the socket from the D-contact switch (S16/9).
3. Remove a stopper (shooter) down and uncover.
4. Weaken collars (41) with bolts (42).
5. Disconnect cables (40L) and (40B) from the lever of the selector of gear shifting.
6. Unscrew bolts (6).
7. Remove the lever of the selector of gear shifting up.

Dismantling

Dismantling and assembly of the lever of the AT selector

1 — the Case
2 — the Lever
3, 9, 58 — Covers
4, 22, 25 — Laying
7а — the Insert
8 — the Tape
10 — Draught of gear shifting
12, 57 — Nuts
13 — the Fork
14 — the Dual spring
15 — the Plastic plug
16, 53 — Blocking devices
17, 54 — Fingers
18 — a gear shifting Rod

23, 27 — Polzuna
26, 55 — Arms
28 — the Switch
30 — the Tube
40В, 40L — Cables
41 — the Collar
42, 52 — the Bolt
44В, 44L — Blocking levers
48 — the Cam
49 — the Clamp
51 — the Basic plate
S16/9 — the D-contact switch


 PERFORMANCE ORDER

1. Uncover (3).
2. Weaken a nut (12) and unscrew the selector lever gear shifting (2).
3. Remove ползун (27), a cover (9), an insert (7a), a tape (8), the D-contact switch (S16/9), an arm (26), ползун (23), laying (25) and the switch (28).
4. Vypressuyte the blocking device (16) also remove the plastic plug (15).
5. Remove a fork (13) and a dual spring (14).
6. Disconnect sealing laying (22).
7. Vypressuyte blocking device (53).
8. Weaken a basic plate (51), take the blocking lever (44B), (44L) and a cam (48) of the case (1).
9. Disconnect the blocking lever (44B), (44L) from a basic plate (51).
10. Remove fingers (4) and take a shaft of gear shifting (18) of an arm (55). Check a rod (18) on lack of signs of wear and grease it before installation.

Assembly and installation

Assembly and installation is made as it should be, the return to removal.